Dyne Technologies makes it easy for you to meet the compliance requirements of

• NFPA 11, Standard for Low, Medium and High-Expansion Foam, 2005 edition
• NFPA 18, Standard on Wetting Agents, 2006 Edition
• NFPA 25, Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems, 2008 edition

---

“At least annually an inspection shall be made of foam concentrates and their tanks or storage containers for evidence of excessive sludging or deterioration. Samples of concentrates shall be sent to the manufacturer or qualified laboratory for quality condition testing.” NFPA 11 Section 7.2

---

Firefighting professionals agree that annual testing of your foam inventory is crucial to maintaining the highest possible level of emergency preparedness. With Dyne Technologies’ annual foam testing/reminder service, you now have an easy, convenient way to ensure that your foam will be ready in case disaster strikes. We will provide you with…

• Free Foam Sampling Kit

• Foam Sampling Forms
(available as hardcopies or downloadable files)

• Postage-Paid Shipping Label

• Comprehensive reports, tank tags and permanent database archived test results

• Cost for testing is $125 per sample, $75 additional charge per sample for 24-hour turnaround of results

---

Plus—Free Reminder Service

When you arrange for Dyne Technologies to perform foam testing, you will automatically be enrolled in our free Reminder Service! Approximately 11 months after we have tested your fire fighting foam concentrate samples, we will send a postcard to remind you that it is time to test again. You are under no obligation to continue to submit samples to Dyne; however, should you decide to do so, simply return the postage paid reply card requesting foam sampling kits.

Dyne Technologies will test all types and brands of fire fighting foam concentrates on the market today.

Order your FREE Foam Sampling Kit now!

---

Dyne Technologies offers three types of foam testing:

1) Foam Concentrate Testing is used to determine whether your undiluted foam concentrate still meets manufacturer specifications, or whether it has degraded in storage. See a description of the procedures used in foam concentrate testing.

2) Foam Solution Testing is used to ensure that your foam system is proportioning correctly.
See a description of the procedure used in foam solution testing.

3) On-site Inspection is performed addition to our in-laboratory testing services, Dyne Technologies can arrange for on-site testing, inspection and maintenance of your foam and sprinkler systems through one of our experienced partnering organizations. Contact us for more details.